Few tried and tested tips on jet washing your patios for better results

Few tried and tested tips on jet washing your patios for better results

This blog post is an excellent guide in itself for those who are new to pressure cleaning the patio.

Cleaning the slabs in a patio with a pressure washer is no less than a doodle, but the task becomes interesting when

there is the urge of getting rid of dirt, grime and weeds properly. This blog post is meant to cater to that urge of

special cleaning. So in the following sections of the blog post let us explore how to properly wash and clean patios

using a pressure washer.  

The patio is unarguably the centrepiece of any garden and there is also no second opinion about the fact that

everyone loves a clean and tidy garden. Here are few tried and tested approaches on properly cleaning your patio

areas along the pitfalls that you must avoid. 

Start with sweeping the surface area

Sweeping the paving stones of a patio is important and you must undertake this task of sweeping as the first thing

every time while cleaning the patio. However everyone who cleans a patio does not take this approach. The point

for you to consider is quite simple – when you start blasting a pressure washer on a dirty patio there is always the

risk of both stone fragments and debris flying in every possible direction. This free flying of the items mentioned

is actually risky and this may damage your windows, the washer and much more. In addition to that in absence of a

clean sweep on the surface area there is always the risk of blasting the same loose dirt and debris on the paving

slabs once again. 

Make your safety gears a priority

While cleaning your patio slabs using a power washer you should always slip on the safety gears first. Wear a pair

of safety goggles before starting on your cleaning mission. If you do not have safety goggles then at least slip on

your glasses. Make sure there is no violation of this safety tip. Fling fragment of a stone or any other solid residue

may hurt the eyes in an accident and such accidents could be fatal warns a professionally trained expert who

performs jet washing in London. Accidents like this have literally blinded many in the past.

Apart from goggles it is also important to slip on a pair of safety gloves too. Flying debris may hit you and cause a

serious cut or wound which may linger for days or weeks together.

Slip on your waterproof gears as well

The power of spray-back from a power or jet washer is immense. So when you use a pressure washer to clean your

patio, be prepared to get completely soaked in the process. You may be most careful about it but still it will not be

practically possible for you to protect yourself from getting soaked from the spray-back of the device. It is better to

slip on your waterproof gears as well before hitting off with the task. Your waterproof gear will not only save you

and your clothes from getting drenched but will also waterproof your other valuables if required.

If you do not remove everything first then you have to clean twice

Spray back from a power washer easily travels meters if not more. In other words we want to tell you when you

use a pressure washer to clean your patio every single item that remains within the patio is bound to get drenched.

This includes your patio furniture, windows, garden decking and everything else that you can name, points out an

expert who performs jet washing Near Me

in London over the years. All these items are not only going to get drenched but also muddy if you do not take

prior precaution. Thus you have to clean the items again. However you can avoid this double effort of cleaning

when you remove all the moveable items from the area in the first place. If there is a heavy item or two that are

difficult to move make sure to cover those in time. 

Test an inconspicuous area of the patio surface to set the correct power or bar

A pressure washer sprays jets of water on a target with tremendous force. So it is always important to test the

power, pressure or bar of a pressure washer before you start the actual cleaning. Carry out this test on a flag or a

slab of stone that is located at some inconspicuous corner of your patio. It is better to try with the generic setting

applying a force within the range of 1,200 to 2,300 PSI. Using the device in this range enables you to apply

sufficient power without spending much effort. It is important to remember that if you select a setting with too

high pressure then the water jet can prove to be horribly damaging. It will then blast off a lot more than just the

moss and the grime build-ups on the surface.

About use of pressure washer detergents

While you are power washing the slabs on a patio, there is no hard and fast rule to use any detergent. But you will

discover that when you use a detergent it brings in better results says an expert who has years of experience

working in a leading jet washing company in London. There is a range of specially formulated detergents and soaps and jet washer manufacturers also recommend

specific products for their devices. If you are careful and cautious with your cleaning effort the best thing that you

can use is warm water. It yields the best possible results when you clean your patio with warm water using a jet

washer.

How bad is pressure cleaning for patios?

It is never bad at all although you should learn the rope properly before heading on with the cleaning task. If you

do not know how to power wash your patio stone slabs gently then obviously damage is inevitable for your

property. There is a high chance of damage of simple flags and natural stones when you use high pressure washers.

That may even force sand out of joints. In order to avoid these untoward incidents you should always use a default

nozzle and keep the pressure of the device low.  

According to professionally trained experts working at the widely trusted VIP carpet Cleaning London pressure washers are a great way to prevent growth of algae and moss on your patio surface.